A.O.Smith ST 300-3000
The ST is a glass-lined storage tank in ten sizes from 300 to 3000 litres, protected against corrosion by PermaGlas Ultra Coat.
Volume range 300–3000 LMax. pressure 10 barInner coating Glass lining
Our Products
Heat pumps, hot water systems and water treatment equipment: filter, compare, request a quote.
82 products
A.O.Smith ST 300-3000
The ST is a glass-lined storage tank in ten sizes from 300 to 3000 litres, protected against corrosion by PermaGlas Ultra Coat.
Volume range 300–3000 LMax. pressure 10 barInner coating Glass lining
Austria Email HT FM
The HT FM is a floor-standing, sheet-steel-clad hygiene storage tank (200 to 500 litres) for hot water in homes and commercial buildings.
Volume range 200–500 LMax. pressure 10 barInner coating Enamel
Austria Email VT-S 800-1000 FFM
VT-S FFM is a multi-purpose large boiler of 800 and 1000 litres with a double flange and no coil.
Volume range 800–1000 LMax. pressure 10 barInner coating Enamel
Austria Email VT 1500-2000 FM
VT FM is a large flanged domestic hot water storage tank of 1500 and 2000 litres (no coil).
Volume range 1500–2000 LMax. pressure 8 barInner coating Enamel
Austria Email BT HP
The BT-HP is a compact buffer tank for heat pump systems (30, 50, 80 and 100 litres), wall-mounted or floor-standing.
Volume range 30–100 LMax. pressure 4 bar
Austria Email WPPS
WPPS is a heating and cooling buffer tank designed specifically for use with heat pumps (130-500 litres).
Volume range 130–500 LMax. pressure 6 barInner coating Raw steel
Viessmann Vitotherm EI5.A3 K
The Vitotherm EI5.A3 K is a compact electric instantaneous water heater with 3.5 kW (230 V), suitable for pressure-resistant and unpressurised installations.
Power 3.5 kW
Viessmann Vitotherm EI5.A5 K
The Vitotherm EI5.A5 K is a compact electric instantaneous water heater with 5.5 kW (230 V), suitable for pressure-resistant and unpressurised installations.
Power 5.5 kW
Viessmann Vitotherm EI6.A24
The Vitotherm EI6.A24 is an electronically controlled comfort continuous-flow heater with 24 kW (400 V) that keeps the outlet temperature constant.
Power 24 kW
A.O.Smith IT 300-3000
The IT is a single coil indirect calorifier in ten sizes from 300 to 3000 litres, suited to a wide range of applications.
Volume range 300–3000 LNumber of coils 1Inner coating Glass lining
Austria Email GTS
The GTS is a thermal accumulator (10 bar) in 115 and 145 litres, used as an auxiliary storage tank for wall-hung gas and condensing boilers.
Volume range 115–145 LNumber of coils 1Inner coating Enamel
Austria Email HT ER-ERM
The HT ER/ERM is a single-coil indirect storage cylinder with smooth-tube heat exchanger, from 160 to 500 litres, with energy-saving PU foam insulation.
Volume range 120–500 LNumber of coils 1Inner coating Enamel
Austria Email VT-S 800-1000 FRM
VT-S FRM is a multi-purpose large boiler of 800 and 1000 litres with a single coil.
Volume range 800–1000 LNumber of coils 1Inner coating Enamel
Austria Email VT 1500-2000 FRM
VT FRM is a large boiler of 1500 and 2000 litres with a single coil.
Volume range 1500–2000 LNumber of coils 1Inner coating Enamel
A.O.Smith ITS 300-1000
The ITS is a dual coil indirect calorifier with a solar coil and a primary coil. It is available in five sizes from 400 to 1000 litres for a wide range of applications.
Volume range 400–1000 LNumber of coils 2Inner coating Glass lining
Austria Email HT ERMR
The HT ERMR is a dual-coil solar storage tank (10 bar) in 200, 300, 400 and 500 litres.
Volume range 200–500 LNumber of coils 2Inner coating Enamel
Austria Email VT-S 800-1000 FRMR
VT-S FRMR is a multi-purpose large boiler of 800 and 1000 litres with a double coil.
Volume range 800–1000 LNumber of coils 2Inner coating Enamel
Austria Email VT 1500-2000 FRMR
VT FRMR is a large boiler of 1500 and 2000 litres with a double coil.
Volume range 1500–2000 LNumber of coils 2Inner coating Enamel
A.O.Smith BFC
The BFC Cyclone is a condensing, glass-lined, gas-fired water heater with 97% gross efficiency. It is available in seven sizes from 28 to 120.
Volume range 217–480 LInner coating Glass lining
Drazice OKC
OKC is a hot water storage tank with a 1 m² heat exchanger (apartment boiler). OKC 100/1, 125/1, 160/1 and 200/1 models are available.
Volume range 100–200 LNumber of coils 1Inner coating Enamel
Austria Email HR
The HR is a large-coil heat pump cylinder (160 to 500 litres), developed for use with condensing boilers and heat pumps.
Austria Email HRS
The HRS is a high-performance heat pump cylinder (200 to 900 litres) with extremely large heating surfaces, built for low return temperatures in the heating circuit.
Austria Email WP SOL
The WP SOL is a dual-coil heat pump solar storage tank that combines a heat pump with a solar thermal system. It is available in 350 and 600 litres.
Viessmann Vitodens 200
The Viessmann Vitodens 200 is a heating boiler used with a control unit with a 3.5-inch black-and-white display. It manages space heating and hot water preparation with time programmes; it can be operated remotely via Wi-Fi and an app.
Polytropic Elite R290
ELITE R290 is a full-inverter swimming pool heat pump that uses the natural, environmentally friendly refrigerant R290. It comes in five models for pools from 15 to 105 m³.
Application PoolPower 9.2–21.5 kWRefrigerant R290
Polytropic Master Inverter
The MASTER INVERTER is a smart full-inverter swimming pool heat pump that can heat and cool, with models for pools from 15 to 150 m³.
Application PoolPower 9.3–28.2 kW
Polytropic Morpheo
The MORPHEO is a high-performance full-inverter swimming pool heat pump with customisable front panels and an LCD touchscreen.
Application PoolPower 6.5–12.5 kWRefrigerant R32
Polytropic Ottimo
The OTTIMO is a quiet, elegantly designed full-inverter swimming pool heat pump with vertical air discharge, in five models for pools from 35 to 105 m³.
Application PoolPower 9.5–20.1 kWRefrigerant R32
Polytropic RAK Inverter
RAK INVERTER is a reversible full-inverter pool heat pump for commercial and large pools. Three-phase models RAK35, RAK50 and RAK100 are available.
Application PoolPower 46.6–123.2 kW
Polytropic Indoor
The INDOOR INVERTER is a special swimming pool heat pump designed to be installed inside the pool technical room, hidden from view and almost inaudible.
Application PoolPower 10.3–19.8 kW
Polytropic Stepio
The STEPIO is a discreet, high-performance heat pump for spas, integrated into an optional step and keeping above-ground spas of up to 8 m³ at 38°C.
Application SpaPower 6.5 kWRefrigerant R32
Polytropic SPA Inverter
The SPA INVERTER is a full-inverter heat pump designed especially for spas, keeping the spa at 38°C even when the outdoor temperature is very cold.
Application SpaPower 9.8 kWRefrigerant R32
Polytropic CRYO Inverter
CRYO Inverter is a full-inverter heat pump designed specifically to cool water down to +5°C for cryotherapy pools.
Application CryotherapyPower 3.8 (cooling) kW
Viessmann Vitocal 150-A
Monobloc air-to-water heat pump for new builds and renovation: 2.1 – 14.9 kW, natural refrigerant R290, flow temperature up to 70 °C.
Power 2.1 – 14.9 kWHeat source Air
Viessmann Vitocal 151-A
Air-to-water compact heat pump with integrated 190 l cylinder: 2.6 – 14.9 kW, R290, flow temperature up to 70 °C.
Power 2.6 – 14.9 kWHeat source Air
Viessmann Vitocal 200-A intelligent energy
Next-generation smart monobloc air-to-water heat pump: 6 – 12 kW, A+++, R290, flow temperature up to 75 °C, Viessmann One Base Intelligence.
Power 6 – 12 kWHeat source Air
Viessmann Vitocal 300-G PRO
Two-stage brine-to-water heat pump for residential and commercial buildings: 84.9 – 222.2 kW (B0/W35), up to 1111 kW in cascade.
Power 84.9 – 222.2 kWHeat source Brine / groundwater
Viessmann Vitocal 350-G PRO
Flexible brine-to-water heat pump for commercial use: 76.7 – 192.6 kW (B0/W35), flow temperature up to 75 °C, frequency-controlled compressors.
Power 76.7 – 192.6 kWHeat source Brine / groundwater
Viessmann Vitocal 350-HT PRO
High-temperature heat pump for waste heat use: flow temperature up to 90 °C, 56.6 – 144.9 kW (B0/W35), commercial applications.
Power 56.6 – 144.9 kWHeat source Brine / groundwater
Elysator H2O DESAL axiom
H2O DESAL axiom 16/64 is a digital filling unit for filling heating and cooling systems and maintaining pressure. No resin replacement or maintenance is required.
Product type Filling / demineralisation
Elysator Purotap Granules
PUROTAP highpower and nexion are vacuum-packed mixed-bed ion exchange resins of certified quality for demineralising mains water. They meet SWKI/VDI requirements.
Product type Filling / demineralisation
Elysator Purotap micro
The PUROTAP micro is a wall-mounted demineralisation unit that filters the mineral salts from tap water for heating systems and general household use.
Product type Filling / demineralisation
Elysator Purotap mini
The PUROTAP mini is a wall-mounted unit with a replaceable cartridge for demineralising system water. It has an integrated combination meter and needs no power connection.
Product type Filling / demineralisation
Elysator Purotap compenso
The PUROTAP compenso refill units provide demineralised water for filling heating water and coolant. They are suitable for a permanent pressure connection.
Product type Filling / demineralisation
Elysator H2O DESAL master
H2O DESAL master is a mobile reverse osmosis unit and the best alternative to mixed-bed resin. It needs no external power.
Product type Filling / demineralisation
Elysator Purotap Expert
The PUROTAP expert is a mobile full desalination unit with a filter membrane (hyper-filtration) for filling heating systems. It delivers 20 litres per minute, or 1,200 litres per hour.
Product type Filling / demineralisation
Elysator Purotap i-control-21s
PUROTAP i-control is an in-line corrosion and conductivity monitoring device. It is simple, reliable and affordable.
Product type Monitoring
Elysator Purotap leader
The PUROTAP leader is a demineralisation unit with a replaceable cartridge system. It needs no power connection, and the cartridge is replaced in seconds.
Product type Filling / demineralisation
Elysator H2O DESAL harion 55 - Descaling
The H2O DESAL harion 55 is a replaceable cartridge for water softening. It dissolves the limescale in the water, prevents scale formation and increases efficiency.
Product type Filter / protection
Elysator H2O DESAL d-toc 55 - Organic Matter
H2O DESAL d-toc 55 is a cartridge that helps to lower the organic matter value (TOC) in circulating water. It meets the requirements of VDI/BTGA 6044 and SWKI BT 102-01 for chemical-free systems.
Product type Filter / protection
Elysator H2O DESAL filt 55 - Cleaning
H2O DESAL filt 55 is a cartridge solution for filtering the water circulating in heating and cooling systems. It helps to reduce operating faults.
Product type Filter / protection
Elysator Sanol H-15
Sanol H-15 green is a Swiss-made heating system cleaner proven over decades. It removes loose sediments in heating and cooling systems.
Product type Cleaning / flushing
Elysator Sanol express
Sanol express is a portable, ready-to-use cartridge filled with Sanol H-15 green. It makes flushing heating and cooling systems easier.
Product type Cleaning / flushing
Elysator Sanomat Berger S-20
The Sanol Sanomat Berger S-20 is a flushing unit that works in both directions for thorough flushing of heating systems. It removes stubborn blockages with compressed-air pulses.
Product type Cleaning / flushing
Elysator SorbOx
The SorbOx LI is a versatile water treatment unit for hydronic heating systems that prevents rust, limescale and gases. It is used for up to 30 kW or 800 litres of circulating water.
Product type Filter / protection
Elysator trio
The ELYSATOR trio .1 is a new generation of corrosion protection devices with more functions for small and medium-sized heating systems (trio 10-1, 15-1 and 25-1). It offers four safety features for clean heating water: filtration, a micro gas bubble separator, anode protection and a magnetic flow filter.
Product type Filter / protection
Elysator H2O GUARD 60v
The H2O GUARD 60v permanently protects any heating or cooling system and needs no external power. It combines self-regulating pH control, degassing and filtration in one unit.
Product type Filter / protection
Elysator Industrial
Elysator Industrial is a solution developed to protect process water circuits for heating and cooling against corrosion and sludge. It is easy to use and efficient.
Product type Filter / protection
Dropson EMI 2500
Dropson EMI 2500 is a new-generation electronic anti-scaling system for villas, apartments and residential homes, protecting plumbing and heating equipment without salt or chemicals using patented EMI technology.
Product type Filter / protection
Dropson EMI 4000
Dropson EMI 4000 is a new-generation salt-free electronic anti-scaling system with 4.5 m³/h peak flow capacity for large villas, boutique hotels and restaurants.
Product type Filter / protection
Dropson EMI 5000
Dropson EMI 5000 is an electronic anti-scaling system specially designed for swimming pools and fountains, protecting filtration and pump circuits with 12 m³/h flow capacity.
Product type Filter / protection
Dropson EMI 7500
Dropson EMI 7500 is a compact, high-efficiency commercial electronic anti-scaling system with 6.5 m³/h continuous flow capacity for hotels, sports centers and residential complexes.
Product type Filter / protection
Dropson EMI 8000
Dropson EMI 8000 is a heavy-duty industrial electronic anti-scaling system with 8.5 m³/h continuous flow capacity for hospitals, major hotels and industrial plants.
Product type Filter / protection
Dropson EMI 9000
Dropson EMI 9000 is the premier electronic anti-scaling system with 12 m³/h high flow capacity for large industrial facilities, resorts and central HVAC energy centers.
Product type Filter / protection
A.O.Smith EES
The EES is a vertical electric water heater for residential and light commercial use. It comes in six storage sizes from 115 to 450 litres and has two replaceable heating elements.
Volume range 115–450 LPower 3.0 kWEnergy class C–D
A.O.Smith DRE
The DRE is a three-phase electric water heater designed mainly for commercial use. It has three to nine Incoloy heating elements and is available as DRE 52 and DRE 80.
Volume range 200–300 LPower 9–54 kWEnergy class C
A.O.Smith STE 1000-3000
STE is a glass-lined enamel-coated electric boiler for industrial and commercial applications. It is available in five models from 1000 to 3000 litres with 15-60 kW electric packages.
Volume range 1000–3000 LPower 15–60 kW
Bandini Q15
The Bandini Q series (Q12 and Q15) are small-capacity electric storage water heaters for kitchen or sink use, in over-sink and under-sink versions.
Power 1.5 kWEnergy class B
Bandini A12
The Bandini A12 is a small-capacity electric storage water heater for kitchen or sink use, available as an over-sink (SP) and an under-sink (ST) version.
Power 1.5 kWEnergy class B–C
Bandini SE
The Bandini SE is a vertical, wall-mounted electric storage water heater, available in 50, 80, 100, 120, 150 and 200 litres.
Volume range 50–200 LPower 1.2–2.0 kWEnergy class C
Bandini SO
The Bandini SO is a horizontal, wall-mounted electric storage water heater, available in 50, 80, 100, 120, 150 and 200 litres.
Volume range 50–200 LPower 1.5–2.0 kWEnergy class C
Austria Email KDU - KDO
The KDO/KDU are pressure-resistant small storage electric water heaters in 5, 10 and 15 litres, as above-sink (KDO) and under-sink (KDU) versions.
Volume range 5–15 LPower 2.0 kWEnergy class A
Drazice OKHE ONE/E
OKHE ONE/E is a slim electric water heater with an electronic thermostat (30-120 litres). It can be installed in narrow spaces and inside kitchen cabinets.
Volume range 30–120 L
Drazice OKCE
OKCE is a Dražice hot water storage tank with an electric heating unit. The OKCE 125, 160 and 200 models can be combined with various sources.
Volume range 50–200 LPower 2–6 (125–200 L) kW
Drazice OKCEV
OKCEV is a Dražice hot water storage tank featured in the same brochure as the OKCE.
Volume range 100–200 L
Drazice TO 5-15
TO and TO/E are small water heaters of 5 and 10 litres with a new design. They are in energy efficiency class A.
Volume range 5–10 LPower 1.5 kWEnergy class A
Viessmann Vitotron
The Viessmann Vitotron 100 is an electric flow boiler for space heating (types VMN3 and VLN3). It is factory preset and operated from the control console.
Product type Heating boiler
Meibes Balancing Vessel
The Meibes balancing vessel combines air separation, sludge separation and hydraulic separation in one device. It is suitable for up to 70 kW (3 m³/h).
Product type Hydraulic unit
Meibes MeiFlow Kombimix
The MeiFlow Kombimix is a compact pump group for heating circuits with and without a mixing valve. It is highly efficient thanks to its EPP insulation.
Product type Hydraulic unit
Meibes LogoFresh
Meibes LogoFresh are electronically and thermostatically controlled fresh water stations that prepare domestic hot water according to the most modern hygiene standards (S, M, L, XL).
Product type Hydraulic unit
Meibes Circulation Valve
The Meibes circulation valve is a thermal control element used in domestic water circulation lines. It provides thermal regulation in the 50-60°C range.
Product type Hydraulic unit
Meibes Solar Station S
The Meibes Solar Station S is a pre-assembled, insulated pump group with all the functions required for solar energy systems.
Product type Hydraulic unit
No products found.